How to maintain doors and windows, do you know the four key points?

Doors and windows play an important role in our home life. They can not only protect us from wind and rain, keep us warm, but also ensure our home safety. Therefore, cleaning and maintenance of doors and windows are very important! Only by mastering the correct door and window maintenance skills can we extend the service life of doors and windows. So how should door and windows be maintained? There are four major tips to pay attention to! Mastering these four points can keep the performance and appearance of your home's doors and windows as good as new for a long time.

 ①

Proper use of doors and windows

◆ Do not push the fixed glass of casement windows hard, as this may cause the glass-fixing strip to shrink, the glass to loosen, and reduce the sealing of the window glass.

◆ Avoid hard objects from knocking against the window frame, as this may easily cause deformation, local scratches, spray peeling, and overall appearance.

◆ Do not push or pull violently when using doors and windows, especially sliding windows. Violent pushing and pulling may easily cause the window sash to derail or deform below, affecting the user experience and service life。

◆ Do not hang heavy objects on the door sash, which may affect the bearing capacity of the hardware, and avoid knocking or scratching the doors and windows with sharp objects.

◆ Do not open the door lock with wet hands, or splash corrosive solvents on wooden doors and door locks.

②

Learn to clean properly

◆ Doors and windows should be cleaned regularly, especially the grooves of doors and windows and the door seals, which are most prone to dust. If possible, deep cleaning with a vacuum cleaner will be more convenient.

◆ When wiping the glass, special glass cleaners or clean water should be used to avoid chemical agents corroding the glass pressure line or aging the glass glue strips.

◆ Blockage of the track drain is one of the reasons for the rust of doors and windows, and is also an important factor in water seepage and leakage. In daily maintenance, it is necessary to pay attention to regular cleaning of the track to ensure that there is no particle dust blockage. Secondly, do not use soapy water to clean to avoid corrosion and rust of the runway.

◆ It is recommended to use soft cotton cloth or gauze (old newspapers can be used for glass) and clean with clean water or neutral detergent. Acidic and alkaline detergents or chemicals should be avoided from contact with doors and windows.

③

Regularly eliminate hidden dangers

◆ Regularly eliminate some hidden dangers, regularly check the hinges and hinges of doors and windows, and do "open early and close late" to avoid the window sashes being opened for a long time under load, causing the door sashes to sag;

◆ All kinds of frequently used hardware accessories and small accessories at the connection position should be tightened in time when the screws are loose. When the door lock hinges and hinges are not opened properly, you can add an appropriate amount of pencil lead foam or hardware lubricant to the connection position for lubrication and maintenance.

④

Pay attention to daily maintenance

◆ Since doors and windows are exposed to wind and rain for a long time, it is necessary to clean up the local water in time, so that it will be more convenient to use and will not reduce the performance. It is best to order lubricating oil every six months to make the performance of doors and windows better.

◆ Do a good job of checking and repairing the sealing. The balance hole is the hole for drainage and pressure reduction of the window frame and sash window of the plastic steel door and window. It is an important part of maintaining the sealing of the window. Daily maintenance should avoid clogging by debris.

Precautions